Cosmetology technique of material for facial rejuvenation

13 January 2021

Every woman dreams of having a new and elastic body all her life. Unfortunately, not all people are able to maintain their youth in a natural way. But do not despair! Now the drug does not stop, so artificial methods of facial rejuvenation appeared, which are demanding on many women, even men.

What is material cosmetology?

Material cosmetology is a procedure performed using specialized equipment to inject cosmetic products under the skin. Currently, with the help of this technology, it is possible to enlarge the breasts, smooth the skin, clean the face and much more without any problems and special efforts.

Unfortunately, the face is the part of the body that begins to age faster. Older women have noticeable wrinkles and loss of skin firmness. To avoid this procedure, they only used the hands of a beautician and some products that had to be applied to the face almost daily, and this did not bring much improvement. Now completely new devices have appeared that are capable of performing various miracles.

To perform such procedures, only modern and improved equipment is used, which experts have a huge number of functions, ways and components. This is done to achieve the best results.

Readings

All cosmetic surgeries should be performed for only two reasons - to prevent and treat signs of aging. The following is a list of some of the essentials for cosmetology:

facial wrinkles?
loss of skin firmness or other signs of aging.
severe skin pigmentation?
fight against overweight or cellulite.
acne?
tattoo removal or permanent makeup.

This list is quite long, but it should be noted that such procedures are very efficient and convenient.The safety of material cosmetology generally depends on the skills of a specialist, the skills and maintenance of his equipment.

Contraindications

Unfortunately, not every woman can use such procedures, because it has several contraindications.

It's important to remember!

For pregnant women, cosmetology material is strictly forbidden, because it can develop various pathologies in the fetus.

What are the contraindications for such procedures? This list only covers the basics and a specialist should get acquainted (gain, obtain) with others.

Oncological diseases?

intolerance to serum or gel for subcutaneous injection.

tumors?

fungi and various inflammatory processes.

poor blood clotting.

hereditary predisposition to bleeding.

As you can see, the contraindications in material cosmetology are very simple. Most importantly, the patient must be healthy. If you have any diseases, then you should first be treated and only then think about cosmetics.

Types of material cosmetology

Everyone can choose the right type of cosmetic procedure, which is right for you and will help you get rid of problems, unwanted areas.

In this age of high technology, there are many different and different processes that help to achieve the desired appearance:

Liposuction- removal of excess weight using special devices. The so-called pumping of excess fat from problem areas. Liposuction is divided into two types: ultrasound and laser. With the names themselves it is clear: in the first method, the fat is pumped by sound and in the second - by laser. It is worth remembering that liposuction is contraindicated for obese people.

Massage material- massage performed using devices. It includes a large number of species that are very different from each other and have different indications. Basically, there are three types of material massage: hydromassage (with water), vibration massage (using artificial vibrations) and spiritual massage (the main distinguishing feature is the strong air currents).

Cryotherapy- a procedure that helps to strengthen the health of the body as a whole, based on the use of cryopreservation or cryopreservation.

Elevation- tightening the skin, smoothing wrinkles and toning muscles. The result of such a procedure can be achieved both with the help of cosmetic preparations and with plastic surgery.

Galvanotherapy- cosmetology material, which allows you to transform the skin with a weak discharge current with low voltage.

Laser Cosmetology- a large group of procedures that include the use of specialized lasers to restore skin elasticity and prevent sagging in the cheek area.

In addition to all these procedures, cosmetology material helps to get rid of new growths on the skin (warts, moles, etc. ), as well as to remove scars after surgery.

Methods of material rejuvenation

Material cosmetology includes a wide variety of rejuvenation techniques. It is simply impossible to choose the most effective of these, because each technique is created for a specific area of the body and skin type.

The most famous and popular methods of rejuvenation among the clients of the clinic:

SMAS Change change.Probably the most popular ultrasound-based method. Today, it is used in almost all beauty clinics and salons. This procedure is completely painless, even a little enjoyable, and the results are very pleasant.

Photorejuvenation.Acts on the epidermis (the deepest layer) of the skin with frequent and intense flashes of light, similar to the process of photography. The result exceeds all expectations: wrinkles are smoothed, acne disappears, skin pigmentation disappears.

Heat.Alternatively, it is also called radio hoist. It is a process of radiofrequency radiation that penetrates the skin and raises its temperature. Thanks to this, collagen is renewed, which is responsible for the firmness and elasticity of the skin.

Revitalization of Elos. This procedure uses both light pulses and weak currents, which contribute to rejuvenation. Such a cosmetology does not bring anything dangerous, it only brings some discomfort with a slight tingling sensation. The result will also not make you wait long.

Facial rejuvenation by injection.They are distinguished into certain subgroups and the most basic injection is a hyaluronic acid injection. This method of rejuvenation is suitable for those who are afraid of surgery, but want to tighten the skin and make it look beautiful.

How to properly combine facial rejuvenation procedures

To achieve a good, noticeable and long-lasting result, you must be able to properly combine completely different techniques for facial rejuvenation. If you approach this issue unknowingly, then there is a possibility that you will seriously damage your health.

For example, a Botox injection works well with a contouring procedure. Thanks to such a combination of these techniques, you can get rid of a large number of mimic wrinkles in a short time. You can also experiment with a combination of heat, and it will not harm the body. Such a procedure will not only help balance the skin layer, but will also help tighten the skin to the muscles, which will make the face more expressive.

Manual massage can be effectively combined with thermal insulation, because when collagen is stimulated, the skin tightens and acts on the muscles in this way, you can consolidate the effect.

Advantages and disadvantages of material cosmetology

Material cosmetology has many more advantages than disadvantages, so thanks to them it is very popular with customers.

Benefits of cosmetic procedures:

The main advantage is the correction of the shape of the face and the condition of the skin without surgeries, which many people are very afraid of.

the result appears in a short time and in a small number of procedures.

the patient experiences minimal discomfort.

enables the individual selection of the necessary technique based on the age of the client, which is also important.

flexibility and good compatibility with other aesthetic procedures.

painless.

Despite all the positive aspects of such cosmetic procedures, you should be aware of the disadvantages, which, unfortunately, also exist. Sometimes you need to fix some problems with manual cleaning and only then use the appliance.

It is worth noting that each process has its own specific advantages and disadvantages, which you can see with examples:

Thermal Insulation

Plus- stimulation of collagen production.

Minus- does not affect muscles.

Manual massage

This is, one might say, the reverse side of thermal insulation.

Plus- the beautician can feel the skin perfectly, so he knows if he will increase or decrease the strength, in which zone he will work best. The facial muscles tighten perfectly, the skin becomes smoother and softer.

Minus- insufficient collagen production.

Manual cleaning

Plus- you can remove these skin imperfections that can not be removed with the help of cleansing material.

Minus- after the procedure, the skin takes on a red tint, slightly painful appearance due to micro-retention. Manual cleaning is a long and painful process that must be done regularly to achieve a result.

Hardware cleaning

Plus- safety and pain.

Minus- completely ineffective when working with problem skin.

Muscostimulation

Plus- direct effect on muscle using waves.

Minus- the beautician does not feel the effect on the client's skin, as with manual cleansing.

Mesotherapy without injection

Plus- rejuvenation, skin stimulation, effective nutrition.

Minus- no effect on muscles.

Comparing all the advantages and disadvantages of cosmetology material, the conclusion is: to achieve the best result, which will surely please you, you must undergo a set of procedures, combining them correctly.

Results

For each client, an individual program of necessary procedures is developed that will suit the skin type, age and lifestyle. The number of sessions also depends on certain conditions. Basically, there will be 2-3 doses for 20 minutes a week. After a whole course of device treatment, the result will please you very much: the scars and damaged skin will disappear, wrinkles will tighten, the face will get a clean ideal contour.

These changes will improve your well-being, you will look younger and even more beautiful. It should be noted that immediately after the procedures, it will not be necessary to carry out rehabilitation and rehabilitation periods. Material cosmetology will soon replace plastic surgery.

Cosmetology of material at home

It also happens that women do not have enough time to visit salons and clinics often, but they really want to stay beautiful. There is a way out! It is now possible to make material cosmetology at home, because this process is quite quick and easy. Today in the cosmetics market you can find many different but different textures, body and face care devices.

The most important thing is to choose a suitable and high quality product, because it will only give you a guarantee of beauty. We must not forget that you must use such devices regularly, otherwise you will not see amazing results.

Many people are afraid of the cosmetology of the material and the phrase itself seems terrible and incomprehensible, but these procedures are really completely different. They are practically painless and completely safe, if, of course, you choose the right specialist. Every person should improve and monitor their appearance and the cosmetology of the material seeks to help them in this!